Description
Rugged Styling and Protection. If your 2007-2013 Toyota Tundra pulls double duty both on the street and out on the trail, you may want to replace the inferior factory rear bumper with one that can handle the extra abuse. This Barricade HD Rear Bumper will provide excellent protection from all kinds of off-road hazards while giving your Tundra rugged off-road styling. Featuring a two high strength D-Ring mounts and integrated corner steps, this heavy duty Barricade Bumper is perfect for those who don’t shy away from adventure.
High Quality Construction. Manufactured from heavy duty steel for strength, this Barricade Rear Bumper is cold formed into shape. After trimming and final finishing Barricade then completes their Bumper in a 2 stage finish using epoxy pre-coating and high-grade textured black powder coating for durability and long lasting corrosion resistance.
Bolt-on Installation. Barricade’s HD Bumper was engineered to be a direct bolt-on upgrade replacement for your original stock bumper reusing the factory mounting points. There is no cutting or modifications required for a simple, straight forward install. With the help of a friend and a set of basic hand tools, this Barricade HD Bumper can be installed in about 2 hours.
Application. This Barricade HD Rear Bumper is designed to fit 2007-2013 Toyota Tundra models.
This bumper is good if you are on a budget and don’t want to drop $1k+ on a one-piece rear bumper. It’s very sturdy and heavy, although I wish they had run the welds all the way down each seam instead of doing only 4” or so on each edge on the inside of the bumper.
Mine came with the powder coat damaged, because it wasn’t wrapped well enough, but the seller worked with me to resolve the issue.
I ended up rolling it with Herculiner inside and out to protect it from rock chips and rust. I added seam sealer to the inside edges that weren’t welded to keep dirt/moisture out of the crevices. It also helped fill in some of the sloppy parts in the footstep area that weren’t welded properly.
I also added plastic wall anchors to the license plate bolt holes and used coarse thread screws so that I didn’t have to deal with nuts and bolts.
Eventually I may cut out the section behind the mesh part and add lights.
Overall, a great bumper for $600ish.