1 20

Barricade

Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

$771.99

$771.99

Sale Sold out

Shipping calculated at checkout.

In stock

SKU: FB14612

View full details

Description
Additional Info
Reviews

Rugged Styling and Protection. This Barricade HD Tubular Rear Bumper will give your Bronco a rugged off-road appearance with its classic tubular styling. Designed to replace the stock factory bumper, this heavy-duty Tubular Bumper features two high strength D-Ring mounts.

LED Fog Lights. This Barricade Rear Bumper includes (2) 3-inch square LED Fog Lights. The fog lights are equipped with 5 Watt CREE LEDs to provide an intense 6000K light temperature. Each light is rated IP67 providing reliable waterproof performance, thanks to a tough aluminum housing sealed with a polycarbonate lens.

Heavy-Duty Construction. Fabricated from heavy-duty tubular steel and steel plate, this Barricade HD Bumper can take on anything the trail throws at it. This HD Tubular Bumper is then completed in a 2-stage epoxy pre-coating and high-grade, textured black powder coat finish for durability and long-lasting corrosion resistance.

Bolt-on Installation. Barricade's HD Tubular Rear Bumper was engineered to be a direct bolt-on upgrade to your factory bumper using basic hand tools, there is no drilling required for a clean, straight forward install. Installation can normally be completed in about 2 hours with just basic hand tools and the help of a friend.

Application. This Barricade HD Tubular Rear Bumper with LED Fog Lights is designed to fit 2021-2025 Ford Bronco models This Rear Bumper is designed to work with models that are equipped with or without rear mounted backup sensors..

Fitment
Vehicle
Category	CollectionDrop

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Overall, the bumper is great quality and had no scratches or imperfections. My issue was the fastening hardware to install the bumper to the frame of the vehicle. With the exception of two screws, the remainder of the hardware was horrible to fasten. My 1/2” Impact Drill could not secure the screws at the bottom of the bumper. I had to use my 1/2 lb-ft ratchet and torque those screws with an insane amount of force. Then when I was close to being complete and had the license plate bracket left, the M12 replacement screws for the spare tire had issues with the screws to secure the license plate. I felt like every fastener was the wrong thread finish (coarse vs fine). I mean, I get you want these things to be secure but when an impact drill on the highest setting is struggling to get the job done, something isn’t right!! I ended buying another license plate bracket just to secure my license plate. Everything else was fine. I did have to modify the OEM sensor cable harness but that wasn’t bad at all. Someone really should verify with the OEM you have the right fasteners for both year and model.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Sturdy tubular bumper with better clearance than stock that looks with thinner fenders

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

like the look of this bumper, the rear sensors still work properly and now i have a strong steel rear bumper.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Arrived packaged VERY well. It is possible to install alone, but help will make it go more easily and quickly. Included instructions are detailed and easy to follow.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

I really like this bumper and bought it to match the Bay Area Metal Fab front bumper I had purchased initially when building my Bronco. I had hoped that BAMF was going to create a matching bumper but they never did and I really needed one as the stock one was starting to get beat up. This is the closest looking bumper that met my requirements. I think it looks great but during the install the mounts were welded slightly out of true and it’s just not as nice of materials and build quality as the BAMF but it’s also 1/3 of the price. So I do think it’s really great value but if you want a super strong excellent build quality bumper this isn’t the one for you. It’s definitely tougher than the Sri k by a decent margin though.

1 2

Rugged Styling and Protection. This Barricade HD Tubular Rear Bumper will give your Bronco a rugged off-road appearance with its classic tubular styling. Designed to replace the stock factory bumper, this heavy-duty Tubular Bumper features two high strength D-Ring mounts.

LED Fog Lights. This Barricade Rear Bumper includes (2) 3-inch square LED Fog Lights. The fog lights are equipped with 5 Watt CREE LEDs to provide an intense 6000K light temperature. Each light is rated IP67 providing reliable waterproof performance, thanks to a tough aluminum housing sealed with a polycarbonate lens.

Heavy-Duty Construction. Fabricated from heavy-duty tubular steel and steel plate, this Barricade HD Bumper can take on anything the trail throws at it. This HD Tubular Bumper is then completed in a 2-stage epoxy pre-coating and high-grade, textured black powder coat finish for durability and long-lasting corrosion resistance.

Bolt-on Installation. Barricade's HD Tubular Rear Bumper was engineered to be a direct bolt-on upgrade to your factory bumper using basic hand tools, there is no drilling required for a clean, straight forward install. Installation can normally be completed in about 2 hours with just basic hand tools and the help of a friend.

Application. This Barricade HD Tubular Rear Bumper with LED Fog Lights is designed to fit 2021-2025 Ford Bronco models This Rear Bumper is designed to work with models that are equipped with or without rear mounted backup sensors..

Fitment
Vehicle
Category	CollectionDrop

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Overall, the bumper is great quality and had no scratches or imperfections. My issue was the fastening hardware to install the bumper to the frame of the vehicle. With the exception of two screws, the remainder of the hardware was horrible to fasten. My 1/2” Impact Drill could not secure the screws at the bottom of the bumper. I had to use my 1/2 lb-ft ratchet and torque those screws with an insane amount of force. Then when I was close to being complete and had the license plate bracket left, the M12 replacement screws for the spare tire had issues with the screws to secure the license plate. I felt like every fastener was the wrong thread finish (coarse vs fine). I mean, I get you want these things to be secure but when an impact drill on the highest setting is struggling to get the job done, something isn’t right!! I ended buying another license plate bracket just to secure my license plate. Everything else was fine. I did have to modify the OEM sensor cable harness but that wasn’t bad at all. Someone really should verify with the OEM you have the right fasteners for both year and model.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Sturdy tubular bumper with better clearance than stock that looks with thinner fenders

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

like the look of this bumper, the rear sensors still work properly and now i have a strong steel rear bumper.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

Arrived packaged VERY well. It is possible to install alone, but help will make it go more easily and quickly. Included instructions are detailed and easy to follow.

Review for Barricade HD Tubular Rear Bumper with LED Fog Lights (21-25 Bronco, Excluding Raptor)

I really like this bumper and bought it to match the Bay Area Metal Fab front bumper I had purchased initially when building my Bronco. I had hoped that BAMF was going to create a matching bumper but they never did and I really needed one as the stock one was starting to get beat up. This is the closest looking bumper that met my requirements. I think it looks great but during the install the mounts were welded slightly out of true and it’s just not as nice of materials and build quality as the BAMF but it’s also 1/3 of the price. So I do think it’s really great value but if you want a super strong excellent build quality bumper this isn’t the one for you. It’s definitely tougher than the Sri k by a decent margin though.

1 2

Chat with usLiveChat