1 22

Barricade

Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

$703.99
$703.99
Sale Sold out
Shipping calculated at checkout.

In stock

Loading delivery estimate...
JG1195
View full details
  • Description
  • Additional Info
  • Reviews

Lighting Up Your Front Bumper. Cut through the thickest darkness on the off-road with the Barricade HD Front Bumper with 20-inch Light Bar. This adventure-style front bumper is built like a brick, constructed using heavy-duty, .1563-inch steel with 2 x .120 inch tubing, supported by a 12,000 pound-rated winch plate and heavy duty D-ring mounts.

Includes 20-Inch LED Light Bar. This unit also comes with a 20-inch LED light bar and D-rings rated at 9,500 pounds. All components are built to exact tolerances for outstanding support.

Installation. If you have moderate-to-expert level mechanical skills, expect this installation to last 2 hours with a medium degree of difficulty.

Application. The Barricade HD Front Bumper with 20-inch Light Bar is compatible with the 2020-2025 Jeep Gladiator JT models.

Please Note. This Barricade bumper supports up to 10,000 lbs. of flat-tow capability using the included D-Rings or integrated tow hooks.

Fitment
Vehicle
CategoryCollectionDrop

Customer Reviews

Based on 40 reviews
73%
(29)
25%
(10)
3%
(1)
0%
(0)
0%
(0)
A
Anonymous
Good bumper, good light, easy install.

Nice steel front bumper that was not bad to install. As indicated on install videos found online, getting the old bumper off takes more time than getting the new one on. For me, freeing up the wiring harness for the fog lights required unassembling the bumper once it was off. Getting the new one on was a little tricky lining up the 8 bolts but with two people it was not bad. The light bar is pretty bright and easy to adjust for aiming. The plug was easy to connect and comes with a switch that you can use and install in your Jeep. Because I have a Voswitch, I cut all of that off and wired it directly to my switch. No trouble switching over OEM fog lights to the new bumper.

D
DAVID B
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Instructions for this bumper are not very good; however, it's just a bumper. Just remove the 8 nuts holding OEM on and remove. Hardware is kinda tricky, but there are plastic washes that help hold them in so it can all be lined up. Looks great once installed. You will not be able to use factory LED foglights off the steel bumper. I'm not sure if halogen will or not. The light bar is bright, but cumbersome to mount. Body is plastic so time will tell is hardware keeps it all in place. Definitely looks good on front of my Rubicon.

S
Stephen H
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Ok, this bumper looks like it is carved from Stone. Total awesome look! Transfer of parts from original to the Barricade HD was a bit of time. Fitting the install was easy but also took, some time. The electrical wiring was very nice a neat with a few ty-wraps and some electrical tape for appeal. The light bar lights-up the highway very bright.

J
James H
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Love the bumper and that you can use stock fog lights. The directions leave ALOT to be desired and had to rely on their installation video. Warning, if using stock LED fog lights, do not install brackets. Video and directions did not make that clear and putting those brackets in stripped 4 of my Allen wrenches when I didn’t even need them. Why are they so tight???

R
Rich G
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Looks great on my Gladiator. Paired with a new grille insert, it really adds to the look of the truck.

123

Lighting Up Your Front Bumper. Cut through the thickest darkness on the off-road with the Barricade HD Front Bumper with 20-inch Light Bar. This adventure-style front bumper is built like a brick, constructed using heavy-duty, .1563-inch steel with 2 x .120 inch tubing, supported by a 12,000 pound-rated winch plate and heavy duty D-ring mounts.

Includes 20-Inch LED Light Bar. This unit also comes with a 20-inch LED light bar and D-rings rated at 9,500 pounds. All components are built to exact tolerances for outstanding support.

Installation. If you have moderate-to-expert level mechanical skills, expect this installation to last 2 hours with a medium degree of difficulty.

Application. The Barricade HD Front Bumper with 20-inch Light Bar is compatible with the 2020-2025 Jeep Gladiator JT models.

Please Note. This Barricade bumper supports up to 10,000 lbs. of flat-tow capability using the included D-Rings or integrated tow hooks.

Fitment
Vehicle
CategoryCollectionDrop

Customer Reviews

Based on 40 reviews
73%
(29)
25%
(10)
3%
(1)
0%
(0)
0%
(0)
A
Anonymous
Good bumper, good light, easy install.

Nice steel front bumper that was not bad to install. As indicated on install videos found online, getting the old bumper off takes more time than getting the new one on. For me, freeing up the wiring harness for the fog lights required unassembling the bumper once it was off. Getting the new one on was a little tricky lining up the 8 bolts but with two people it was not bad. The light bar is pretty bright and easy to adjust for aiming. The plug was easy to connect and comes with a switch that you can use and install in your Jeep. Because I have a Voswitch, I cut all of that off and wired it directly to my switch. No trouble switching over OEM fog lights to the new bumper.

D
DAVID B
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Instructions for this bumper are not very good; however, it's just a bumper. Just remove the 8 nuts holding OEM on and remove. Hardware is kinda tricky, but there are plastic washes that help hold them in so it can all be lined up. Looks great once installed. You will not be able to use factory LED foglights off the steel bumper. I'm not sure if halogen will or not. The light bar is bright, but cumbersome to mount. Body is plastic so time will tell is hardware keeps it all in place. Definitely looks good on front of my Rubicon.

S
Stephen H
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Ok, this bumper looks like it is carved from Stone. Total awesome look! Transfer of parts from original to the Barricade HD was a bit of time. Fitting the install was easy but also took, some time. The electrical wiring was very nice a neat with a few ty-wraps and some electrical tape for appeal. The light bar lights-up the highway very bright.

J
James H
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Love the bumper and that you can use stock fog lights. The directions leave ALOT to be desired and had to rely on their installation video. Warning, if using stock LED fog lights, do not install brackets. Video and directions did not make that clear and putting those brackets in stripped 4 of my Allen wrenches when I didn’t even need them. Why are they so tight???

R
Rich G
Review for Barricade HD Front Bumper with 20-Inch Light Bar (20-25 Jeep Gladiator JT)

Looks great on my Gladiator. Paired with a new grille insert, it really adds to the look of the truck.

123