Description
Protection and Style. Add extra protection to your 2007-2018 JK while improving its style with a set of Barricade Off-Road Flat Style Tubular Fender Flares. Featuring a flat fender design, these Tubular Flares will open up your Wrangler’s wheel wells for a more aggressive off-road appearance. These Tubular Flares not only provide additional tire coverage to protect your rig from flying debris, but they also give you a little extra room when upgrading to a beefier set of tires.
Fender Mounted LED Accent Lights. Barricade Off-Road had the foresight to design their front Fender Flares with LED accent lights. These two forward facing flare mounted LED lights not only help to light up the dark path ahead, but they also give your Jeep an impressive appearance.
Heavy Duty Construction. Manufactured for maximum durability, these Barricade Flares are crafted from 1.5mm thick carbon steel plate and durable 38mm X 2.5mm carbon steel tubing, allowing them to take on anything the trail throws at them. These Tubular Fender Flares are finished in a two stage epoxy pre-coating and high-grade textured black powder coating for durability and long lasting corrosion resistance.
Bolt-on Installation. Barricade’s Tubular Fender Flares were designed to be a direct bolt-on upgrade using just basic hand tools. Please note that minor drilling will be required for installation. Installation of the LED accent lights will require some minor wiring for operation.
Application. These Barricade Off-Road Flat Tubular Style Fender Flares are specifically designed for use on 2007-2018 Jeep Wrangler JK models. These Barricade Fender Flares are available as a set of 2 front fender flares, as a set of 2 rear fender flares or as a complete set of 4 flares. Please select your choice from the options listed above.
Juan G (verified owner) –
Everything about these fenders is great. It was easy to Install, they should tell you that you need a Special Tool to install the back fenders. But overall they are sturdy, and they look awesome …
Tiras G (verified owner) –
this product is trash. the set has already started to rust and the weld lines and construction is trash. not even looking symmetric. bumpy looking. worst product I put on my jeep, smh
Don C (verified owner) –
Love them!
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Phillip H (verified owner) –
Came with missing some hardware…et sent out a complete replacement set. You do need a rivnut too for the rear fenders. All the holes lined up. It required some minor drilling. The led’s look kinda like the JL jeep. The only thing is the wiring is unprotected so I used heat shrink to protect it. You will need to cut and splice black to black wires from your side marker lights for power.
Michael W (verified owner) –
Great product but if you want to use your factory inner liners it will be a bit of a project to install. I had to mount and remount (2 bolts just for fitment) the fender 3 times to get the liner marked for cutting. You can use a heat gun to reshape the liner to cover gaps where it meets the fender. It took me 5 hours to do the front end but it looks almost factory. I also made 2 brackets for each side which secures the liner better than factory.